메뉴 건너뛰기

Cloudera, BigData, Semantic IoT, Hadoop, NoSQL

Cloudera CDH/CDP 및 Hadoop EcoSystem, Semantic IoT등의 개발/운영 기술을 정리합니다. gooper@gooper.com로 문의 주세요.


1. 현재 연결된 기기 확인

(아래는 31.7GB(/dev/mmcblk0)과 1000.2 GB(/dev/sda)의 2개의 외장기기 확인됨

   /dev/mmcblk0는 /dev/mmcblk0p1과 /dev/mmcblk0p2의 2개 파티션으로 구성 되어 있고

          /dev/sda는 /dev/sda1로 파티션 1개로 구성되어 있음)

root@slave1:~# fdisk -l

Disk /dev/mmcblk0: 31.7 GB, 31657558016 bytes
4 heads, 16 sectors/track, 966112 cylinders, total 61831168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xf7e9dfe5

        Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1            2048       40960       19456+  81  Minix / old Linux
/dev/mmcblk0p2           40961     7577599     3768319+  81  Minix / old Linux

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xc197d009

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048  1953521663   976759808    7  HPFS/NTFS/exFAT

 

2. device에 mount할 폴더 생성

root@slave1:~# mkdir /app
root@slave1:~# mkdir /app/usb
root@slave1:~# mkdir /app/usb2
root@slave1:~# mkdir /app/hdd

 

3. hdd는 인식가능하게 파티션을 생성해야함..

root@slave1:/# fdisk /dev/sda

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel with disk identifier 0xb092454e.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won't be recoverable.


Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)


The device presents a logical sector size that is smaller than

the physical sector size. Aligning to a physical sector (or optimal

I/O) size boundary is recommended, or performance may be impacted.


Command (m for help): o

Building a new DOS disklabel with disk identifier 0xb5607451.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won't be recoverable.


Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)


The device presents a logical sector size that is smaller than

the physical sector size. Aligning to a physical sector (or optimal

I/O) size boundary is recommended, or performance may be impacted.


Command (m for help): n

Partition type:

   p   primary (0 primary, 0 extended, 4 free)

   e   extended

Select (default p): p

Partition number (1-4, default 1): 

Using default value 1

First sector (2048-1953525167, default 2048): 

Using default value 2048

Last sector, +sectors or +size{K,M,G} (2048-1953525167, default 1953525167): 

Using default value 1953525167


Command (m for help): w

The partition table has been altered!


Calling ioctl() to re-read partition table.

Syncing disks.


4. 작성된 파티션을 사용하기 위해 파일시스템을 생성한다.

(아래는 전체를 파티션 1개로 설정한 경우임)

root@slave1:/# mkfs -t ext4 /dev/sda1

mke2fs 1.42.5 (29-Jul-2012)

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

61054976 inodes, 244190390 blocks

12209519 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=0

7453 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks: 

        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 

        4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 

        102400000, 214990848


Allocating group tables: done                            

Writing inode tables: done                            

Creating journal (32768 blocks): done

Writing superblocks and filesystem accounting information: done     


*파티션 정보 확인

root@slave1:/# fdisk -l


Disk /dev/sda: 1000.2 GB, 1000204886016 bytes

81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk identifier: 0xb5607451


   Device Boot      Start         End      Blocks   Id  System

/dev/sda1            2048  1953525167   976761560   83  Linux


Disk /dev/mmcblk0: 31.7 GB, 31657558016 bytes

4 heads, 16 sectors/track, 966112 cylinders, total 61831168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xf7e9dfe5


        Device Boot      Start         End      Blocks   Id  System

/dev/mmcblk0p1            2048       40960       19456+  81  Minix / old Linux

/dev/mmcblk0p2           40961     7577599     3768319+  81  Minix / old Linux

root@slave1:/# fdisk -l


Disk /dev/sda: 1000.2 GB, 1000204886016 bytes

81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk identifier: 0xb5607451


   Device Boot      Start         End      Blocks   Id  System

/dev/sda1            2048  1953525167   976761560   83  Linux


Disk /dev/mmcblk0: 31.7 GB, 31657558016 bytes

4 heads, 16 sectors/track, 966112 cylinders, total 61831168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xf7e9dfe5


        Device Boot      Start         End      Blocks   Id  System

/dev/mmcblk0p1            2048       40960       19456+  81  Minix / old Linux

/dev/mmcblk0p2           40961     7577599     3768319+  81  Minix / old Linux


5. device와 폴더 연결(mount)

root@slave1:/# mount /dev/sda1 /app/hdd

 

6. 자동 mount설정

 vi /etc/fstab에 아래의 내용을 추가한다.

 

 /dev/sda1       /app/hdd        ext4    defaults        0       0


번호 제목 날짜 조회 수
750 [Shellscript]Impala view의 실제 참조 테이블 추출용 shellscript파일 2025.03.22 1002
749 엑셀에서 K ,M, G ,T 단위를 숫자로 변환 하는 수식 2025.04.09 1262
748 beeline을 이용한 impala JDBC 테스트 방법(Kerberos 설정된 상태임) 2024.11.29 1539
747 외부에서 ImpalaJDBC42.jar를 통해서 Impala에 접속시 sessions정보 2024.11.26 1625
746 test333 2017.05.01 1834
745 http://blog.naver.com... 2017.06.23 1838
744 Failed to resolve 'acme-v02.api.letsencrypt.org' ([Errno -3] Temporary failure in name resolution)" 2024.11.27 1915
743 eclipse 3.1 단축키 정리파일 2017.01.02 2058
742 5건의 triple data를 이용하여 특정 작업 폴더에서 작업하는 방법/절차 2016.06.16 2079
741 [vi] test.nq파일에서 특정문자열(예, <>)을 찾아서 포함되는 라인을 삭제한 동일한 이름의 파일을 만드는 방법 2017.01.25 2079
740 Windows에서 sbt개발환경 구축 방법(링크) 2016.06.02 2087
739 [EncryptionZone]User:testuser not allowed to do "DECRYPT_EEK" on 'testkey' 2023.06.29 2097
738 외부 jar파일을 만들려고하는jar파일의 package로 포함하는 방법 2016.08.10 2105
737 java스레드 덤프 분석하기 file 2016.11.03 2114
736 restaurant-controller,에서 등록 예시 2022.04.30 2124
735 DataSetCreator.py 실행시 파일을 찾을 수 없는 오류 2016.05.27 2129
734 실시간 쿼리 변환 모니터링(팩트내 필드값의 변경사항을 실시간으로 추적함)하는 테스트 java 프로그램 file 2016.07.21 2129
733 [oracle]10자리 timestamp값을 날짜로 변환하는 방법 2022.04.14 2164
732 하둡기반 데이타 모델링(6편) 2018.06.27 2177
731 [메모리 덤프파일 분석] 2017.03.31 2242
위로