메뉴 건너뛰기

Cloudera, BigData, Semantic IoT, Hadoop, NoSQL

Cloudera CDH/CDP 및 Hadoop EcoSystem, Semantic IoT등의 개발/운영 기술을 정리합니다. gooper@gooper.com로 문의 주세요.


1. tomcat7 설치

sudo apt-get install tomcat7 tomcat7-admin하면 /usr/share/tomcat7에 설치됨

설치후에 http://localhost:8080/하면 It works !페이지가 보인다.

이때. 

tomcat home은 /usr/share/tomcat7 

tomcat 설정은 /etc/tomcat7

tomcat 로그는 /var/log/tomcat7

tomcat document root directory는 /var/lib/tomcat7/webapps에 있다.


* tomcat기동 : service tomcat7 start

* tomcat다운 : service tomcat7 stop 


* 설치중 오류발생시 systemctl status tomcat7.service를 실행하여 확인후 조치한다.

root@gsda1:/var/lib/dpkg/info# systemctl status tomcat7.service
[0m tomcat7.service - LSB: Start Tomcat.
   Loaded: loaded (/etc/init.d/tomcat7; bad; vendor preset: enabled)
   Active: failed (Result: exit-code) since Tue 2017-05-02 07:50:08 UTC; 51s ago
     Docs: man:systemd-sysv-generator(8)
  Process: 925 ExecStart=/etc/init.d/tomcat7 start (code=exited, status=1/FAILURE)

May 02 07:50:08 sda1 systemd[1]: Starting LSB: Start Tomcat....
May 02 07:50:08 sda1 tomcat7[925]:  * no JDK or JRE found - please set JAVA_HOME
May 02 07:50:08 sda1 systemd[1]: tomcat7.service: Control process exited, code=exited status=1
May 02 07:50:08 sda1 systemd[1]: Failed to start LSB: Start Tomcat..
May 02 07:50:08 sda1 systemd[1]: tomcat7.service: Unit entered failed state.
May 02 07:50:08 sda1 systemd[1]: tomcat7.service: Failed with result 'exit-code'.
root@gsda1:/var/lib/dpkg/info# service tomcat7 start
Job for tomcat7.service failed because the control process exited with error code. See "systemctl status tomcat7.service" and "journalctl -xe" for details.

* JAVA_HOME이 설정되어 있는데도 불구하고 위오아 같은 오류가 발생하면 http://zipeya.tistory.com/entry/ubuntu-1404-LTS%EC%97%90-tomcat7-%EC%84%A4%EC%B9%98%ED%95%98%EA%B8%B0 를 참조하여

vi /etc/default/tomcat7하여 기동스크립트의 JAVA_HOME값을 설정하여 준다.

그리고 sudo service tomcat7 start 로 tomcat을 재기동 해준다.



2. mod_jk 설치

sudo apt-get install libapache2-mod-jk로 설치하면 설치후 /etc/apache2/mods-available에 자동으로 들어감


3. workers.properties 설정

sudo vi /etc/libapache2-mod-jk/workers.properties 해서 아래의 색상이 있는 부분을 적절하게 수정한다.

-----------------------------------------------------------------------

# OPTIONS ( very important for jni mode ) 


#

# workers.tomcat_home should point to the location where you

# installed tomcat. This is where you have your conf, webapps and lib

# directories.

#

workers.tomcat_home=/usr/share/tomcat7


#

# workers.java_home should point to your Java installation. Normally

# you should have a bin and lib directories beneath it.

#

workers.java_home=/usr/lib/jvm/java-8-oracle

#

# You should configure your environment slash... ps= on NT and / on UNIX

# and maybe something different elsewhere.

#

ps=/

...

....

....

....

#

# The workers that your plugins should create and work with

worker.list=ajp13_worker

-----------------------------------------------------------------------------------------


4. tomcat의 server.xml파일 수정

sudo vi /var/lib/tomcat7/conf/server.xml

에서 아래 부분이 주석이 되어 있는데.. 주석을 풀어준다. 해당라인이 없으면 추가해준다.
<!-- Define an AJP 1.3 Connector on port 8009 -->
    <!--
    <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
    -->
============>
<!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />

5. JKMount설정
sudo vi /etc/apache2/mods-available/jk.conf을 열어서 </VirtualHost>바로 윗줄에 JKMount /* ajp13_worker를 추가한다.
--------------------------------------------------------
        Deny from all
        Allow from 127.0.0.0/255.0.0.0 ::1/128
    </Directory>

JKMount /* ajp13_worker
</VirtualHost>
-------------------------------------------------


apache관련 명령
hadoop@bigdata-host:/etc/apache2$ apachectl
Usage: /usr/sbin/apachectl start|stop|restart|graceful|graceful-stop|configtest|status|fullstatus|help
       /usr/sbin/apachectl <apache2 args>
       /usr/sbin/apachectl -h            (for help on <apache2 args>)

tomcat관련 명령
/usr/share/tomcat7/bin 에서 startup.sh과 shutdown.sh을 이용하면.. bug에 의한 오류가 발생하므로....service tomcat7 restart를 사용한다.

-------------------------------------------------------------------------------------------------------------------------------------------------
hadoop@bigdata-host:~/flume$ sudo service tomcat7 restart
 * Stopping Tomcat servlet engine tomcat7                                                                                 [ OK ] 
 * Starting Tomcat servlet engine tomcat7                                                                                 [ OK ] 
-------------------------------------------------------------------------------------------------------------------------------------------------

6. tomcat manager및 host-manager 화면 접근방법

  가. /etc/tomat7/tomcat-users.xml에서 주석으로 막혀있는 사용자및 패스워드 설정에 대한 주석을 제거하고

       manager화면접근을 위해서

         <role rolename="manager-gui"/>와   <user username="admin" password="admin" roles="manager-gui"/>를 추가하고

       host-manager에 접근하기 위해서

          <role rolename="admin-gui"/>와 <user username="admin" password="admin" roles="admin-gui"/>를 추가하고

      저장한다.

  나. service tomcat7 restart하여 반영하여 준다.

  다. http://localhost:8080/manager/html/로 접근하여 id및 패스워드를 입력한다.

------------------------/etc/tomcat7/tomcat-users.xml--------------------------

<tomcat-users>
<!--
  NOTE:  By default, no user is included in the "manager-gui" role required
  to operate the "/manager/html" web application.  If you wish to use this app,
  you must define such a user - the username and password are arbitrary.
-->
<!--
  NOTE:  The sample user and role entries below are wrapped in a comment
  and thus are ignored when reading this file. Do not forget to remove
  <!.. ..> that surrounds them.
-->
<!--  -->
  <role rolename="tomcat"/>
  <role rolename="role1"/>
  <role rolename="manager-gui"/>

  <role rolename="admin-gui"/>

  <user username="tomcat" password="tomcat" roles="tomcat"/>
  <user username="both" password="tomcat" roles="tomcat,role1"/>
  <user username="role1" password="tomcat" roles="role1"/>
  <user username="admin" password="admin" roles="manager-gui"/>

  <user username="admin" password="admin" roles="admin-gui"/>

<!---->
</tomcat-users>

번호 제목 날짜 조회 수
650 [Hue metadata]Oracle에 있는 Hue 메타정보 테이블을 이용하여 coordinator와 workflow관계 목록을 추출하는 방법 2023.08.22 2860
649 [SparkR]SparkR 설치 사용기 1 - Installation Guide On Yarn Cluster & Mesos Cluster & Stand Alone Cluster file 2016.11.04 2862
648 S2RDF 테스트(벤치마크 테스트를 기준으로 python, scala소스가 만들어져서 기능은 파악되지 못함) [1] file 2016.05.27 2864
647 Could not configure server becase SASL configuration did not allow the Zookeeper server to authenticate itself properly: javax.security.auth.login.LoginException: Checksum failed 2019.05.18 2870
646 hbase startrow와 endrow를 지정하여 검색하기 샘플 2016.12.07 2876
645 anaconda3(v5.4)를 이용하여 tensorflow설치후 ipython프로그램을 실행하여 import할때 오류발생시 조치 2018.07.27 2879
644 S2RDF를 이용한 다른 버젼의 github링크 2016.12.02 2881
643 서버 5대에 solr 5.5.0 설치하고 index data를 HDFS에 저장/search하도록 설치/설정하는 방법(SolrCloud) 2016.04.08 2907
642 elasticsearch 1.3.0에서 rdf및 hadoop plugin설치 2016.04.06 2919
641 elasticsearch에서 모든 인덱스(색인)을 삭제하는 방법 2019.06.09 2919
640 초기 오류(java.lang.NoSuchMethodError)에 따른 후속 작업에서 오류(java.lang.NoClassDefFoundError)가 발생되는 상황(quartz에서 주기적으로 작업시) 2016.08.29 2922
639 python 2.6.6에서 print 'A=' 형태의 사용이 python 3.5.1에서 오류(SyntaxError: Missing parentheses in call to 'print') 발생함.. 2016.05.27 2928
638 천문학적, 기후학적, 기상학적, 생물학적, 농사계절 구분 2015.12.16 2931
637 jena의 data폴더를 hadoop nfs를 이용하여 HDFS상의 폴더에 마운트 시키고 fuseki를 통하여 inert를 시도했을때 transaction 오류 발생 2016.12.02 2940
636 oneM2M Specification(Draft Release 3, 2, 1), Draft Technical Reports 2017.10.25 2940
635 [Impala] alter table구문수행시 "WARNINGS: Impala does not have READ_WRITE access to path 'hdfs://nameservice1/DATA/Temp/DB/source/table01_ccd'" 발생시 조치 2024.04.26 2940
634 lagom-windows용 build.sbt파일 내용 2017.10.12 2946
633 Incompatible clusterIDs오류 원인및 해결방법 2016.04.01 2948
632 Elastic Search For Hadoop 2.2.0설치하기(5대 클러스터링) 2016.04.04 2952
631 spark-shell실행시 "A read-only user or a user in a read-only database is not permitted to disable read-only mode on a connection."오류가 발생하는 경우 해결방법 2016.05.20 2953
위로