메뉴 건너뛰기

Cloudera, BigData, Semantic IoT, Hadoop, NoSQL

Cloudera CDH/CDP 및 Hadoop EcoSystem, Semantic IoT등의 개발/운영 기술을 정리합니다. gooper@gooper.com로 문의 주세요.


1. 현재 연결된 기기 확인

(아래는 31.7GB(/dev/mmcblk0)과 1000.2 GB(/dev/sda)의 2개의 외장기기 확인됨

   /dev/mmcblk0는 /dev/mmcblk0p1과 /dev/mmcblk0p2의 2개 파티션으로 구성 되어 있고

          /dev/sda는 /dev/sda1로 파티션 1개로 구성되어 있음)

root@slave1:~# fdisk -l

Disk /dev/mmcblk0: 31.7 GB, 31657558016 bytes
4 heads, 16 sectors/track, 966112 cylinders, total 61831168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xf7e9dfe5

        Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1            2048       40960       19456+  81  Minix / old Linux
/dev/mmcblk0p2           40961     7577599     3768319+  81  Minix / old Linux

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xc197d009

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048  1953521663   976759808    7  HPFS/NTFS/exFAT

 

2. device에 mount할 폴더 생성

root@slave1:~# mkdir /app
root@slave1:~# mkdir /app/usb
root@slave1:~# mkdir /app/usb2
root@slave1:~# mkdir /app/hdd

 

3. hdd는 인식가능하게 파티션을 생성해야함..

root@slave1:/# fdisk /dev/sda

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel with disk identifier 0xb092454e.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won't be recoverable.


Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)


The device presents a logical sector size that is smaller than

the physical sector size. Aligning to a physical sector (or optimal

I/O) size boundary is recommended, or performance may be impacted.


Command (m for help): o

Building a new DOS disklabel with disk identifier 0xb5607451.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won't be recoverable.


Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)


The device presents a logical sector size that is smaller than

the physical sector size. Aligning to a physical sector (or optimal

I/O) size boundary is recommended, or performance may be impacted.


Command (m for help): n

Partition type:

   p   primary (0 primary, 0 extended, 4 free)

   e   extended

Select (default p): p

Partition number (1-4, default 1): 

Using default value 1

First sector (2048-1953525167, default 2048): 

Using default value 2048

Last sector, +sectors or +size{K,M,G} (2048-1953525167, default 1953525167): 

Using default value 1953525167


Command (m for help): w

The partition table has been altered!


Calling ioctl() to re-read partition table.

Syncing disks.


4. 작성된 파티션을 사용하기 위해 파일시스템을 생성한다.

(아래는 전체를 파티션 1개로 설정한 경우임)

root@slave1:/# mkfs -t ext4 /dev/sda1

mke2fs 1.42.5 (29-Jul-2012)

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

61054976 inodes, 244190390 blocks

12209519 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=0

7453 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks: 

        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 

        4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 

        102400000, 214990848


Allocating group tables: done                            

Writing inode tables: done                            

Creating journal (32768 blocks): done

Writing superblocks and filesystem accounting information: done     


*파티션 정보 확인

root@slave1:/# fdisk -l


Disk /dev/sda: 1000.2 GB, 1000204886016 bytes

81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk identifier: 0xb5607451


   Device Boot      Start         End      Blocks   Id  System

/dev/sda1            2048  1953525167   976761560   83  Linux


Disk /dev/mmcblk0: 31.7 GB, 31657558016 bytes

4 heads, 16 sectors/track, 966112 cylinders, total 61831168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xf7e9dfe5


        Device Boot      Start         End      Blocks   Id  System

/dev/mmcblk0p1            2048       40960       19456+  81  Minix / old Linux

/dev/mmcblk0p2           40961     7577599     3768319+  81  Minix / old Linux

root@slave1:/# fdisk -l


Disk /dev/sda: 1000.2 GB, 1000204886016 bytes

81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk identifier: 0xb5607451


   Device Boot      Start         End      Blocks   Id  System

/dev/sda1            2048  1953525167   976761560   83  Linux


Disk /dev/mmcblk0: 31.7 GB, 31657558016 bytes

4 heads, 16 sectors/track, 966112 cylinders, total 61831168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xf7e9dfe5


        Device Boot      Start         End      Blocks   Id  System

/dev/mmcblk0p1            2048       40960       19456+  81  Minix / old Linux

/dev/mmcblk0p2           40961     7577599     3768319+  81  Minix / old Linux


5. device와 폴더 연결(mount)

root@slave1:/# mount /dev/sda1 /app/hdd

 

6. 자동 mount설정

 vi /etc/fstab에 아래의 내용을 추가한다.

 

 /dev/sda1       /app/hdd        ext4    defaults        0       0


번호 제목 날짜 조회 수
501 Cloudera가 사용하는 서비스별 포트 2018.03.29 427
500 Cloudera가 사용하는 서비스별 디렉토리 2018.03.29 360
499 cloudera-scm-agent 설정파일 위치및 재시작 명령문 2018.03.29 405
498 [CentOS] 네트워크 설정 2018.03.26 386
497 Components of the Impala Server 2018.03.21 378
496 HDFS Balancer설정및 수행 2018.03.21 277
495 hadoop 클러스터 실행 스크립트 정리 2018.03.20 699
494 HA(Namenode, ResourceManager, Kerberos) 및 보안(Zookeeper, Hadoop) 2018.03.16 188
493 자주쓰는 유용한 프로그램 2018.03.16 1385
492 에러 추적(Error Tracking) 및 로그 취합(logging aggregation) 시스템인 Sentry 설치 2018.03.14 245
491 update 샘플 2018.03.12 1030
490 이미지 관리 오픈소스 목록 2018.03.11 382
489 Scala에서 countByWindow를 이용하기(예제) 2018.03.08 630
488 Scala를 이용한 Streaming예제 2018.03.08 508
487 scala application 샘플소스(SparkSession이용) 2018.03.07 304
486 fuseki의 endpoint를 이용한 insert, delete하는 sparql예시 2018.02.14 208
485 프로세스를 확인해서 프로세스를 삭제하는 shell script예제(cryptonight) 2018.02.02 422
484 spark-submit 실행시 "java.lang.OutOfMemoryError: Java heap space"발생시 조치사항 2018.02.01 641
483 Could not compute split, block input-0-1517397051800 not found형태의 오류가 발생시 조치방법 2018.02.01 334
482 Hadoop의 Datanode를 Decommission하고 나서 HBase의 regionservers파일에 해당 노드명을 지웠는데 여전히 "Dead regionser"로 표시되는 경우 처리 2018.01.25 494
위로